RX700 Pneumatic Polyurethane Spray Machine ,Spray Foam Insulation Equipment
RX700 a professional, cost-effective polyurethane spray machine.
Suitable for environmental friendly pure water foaming rawmaterials and common polyurethane raw materials spraying and injection. Applied in Building roof/External wall insulation/cold storage construction pipe tank insulation,Automobile bus finishing boat insulation and other fileds.
Technical parameters:
| Model | RX700 Polyurethane Spray Machine |
| Applicable materials | Polyurethane/Polyurea |
| The ratio of raw material | 1:1 |
| Viscosity range of raw materials | 200-1000CPS (under working temperature) |
| Max working pressure | 22MPa |
| Max fluid temperature | 80°C |
| Max output | 2-12kg/min |
| Max heated hose length (Optional) | 90m |
| Heater power | 4500W×2 |
| Heated hose max power | 3000W |
| Drive mode | Full pneumatic |
| Clean mode | Self-cleaning by air |
| Voltage (Optional) | Single phase 220V 50Hz or Three phase 380V 50Hz |
| Whole power | 12kw |
| Pneumatic source | 0.5-0.8Mpa 1m³/min |
| Machine New Weight And Size | 165KG, 650*600*1000mm |
| Machine Freight Weight And Size | 245KG,820*820*1450mm |
Standard Configuration:
| Reanin-RX700 mainframe | 1 set |
| Reanin spray gun | 1 set |
| Transfer pump | 2 sets |
| Heated hose | 15m |
| Transfer pump hose | 2 pcs |
| Whip hose | 2 pcs |
| Air pipe | 1 set |
| Tools and spare parts | 1 set |
Application:
1. Polyurethane/Polyurea foam spray on wall & roof for insulation,
2. Construction concrete slab raising/ lifting & seam filling injection,
3. Cold storage spray insulation,
4. Tank and pipe spray & injection polyurethane insulation,
5. Polyurethane foam for package cushioning,
6. Car roof spray insulation,
7. Highway, railway, automobile, watercraft, mining petroleum, electrical industry, food industry etc.
Advantages:
1.This machine has pass the CE certificate,
2.Machine Panel with operation tips is easy to set up,
3.Fully pneumatic design, it can work normally without electricity,
4.The booster pump is simple in structure and easy to disassemble and maintain,
5.The stop reset function can make the booster pump shafts always infiltrated in the booster pump, which can avoid damage to the seals and booster pump shafts caused by ISO crystallization,
6.A/B/Hose independent temperature control, can set different temperatures separately, adapt to the temperature requirements of different material,
7.Variable frequency temperature control mode and special real-time temperature collection sensor ensure that the material temperature is controlled within a small fluctuation range,
8.The integrated heated hose is covered with wear-resistant insulating sleeve, which not only can effectively keep the temperature of the material, but also can prevent the occurrence of leakage, short circuit, etc.
9.The transfer pumps, mainframe and spray gun are equipped with filtering devices, which can effectively filter impurities and crystals in the materials and reduce the occurrence of the blocking gun,
10.Equipped with an action counter to accurately calculate the amount of raw materials,
Product Tags:
|
|
4500W*2 Heater Polyurea Polyurethane Spray Machine With 90m Hose Images
|
